Glass material is mainly sapphire and glass. For sapphire is more expensive. As a rule, the material is expensive to fake watches. Sapphire glass is very common and also a trend in the future, and the price of glass is relatively cheap. Usually it is used at cheap watches. In fact, dear good, cheap, too, is an advantage.
2. Characteristics of the table sapphire crystal quartz glass.
The sapphire crystal is widely used. The sapphire crystal is mainly in accordance with the needs of modern society. Sapphire glass has a strong wear resistance and is not easy to scratch on a daily basis. Thus, after wearing longer time, the sapphire crystal will be relatively more beautiful than glass. It will be more transparent.
3. Features watch quartz glass.
While looking at glass is relatively cheap fake Rolex, looking out of glass is also an advantage. The hardness of looking at glass is stronger than that of sapphires. The collision of resistance is strong, the daily use is not easy to break and the durability is relatively high. It’s easy to scratch it. Beauty can not stand the test of time.
When purchasing a mechanical replica watches, you should pay attention to the following:
1. Appearance visual inspection of the outer casing, face, needle, “sand eye” zero, bright color, no color difference, back cover, closed.
2. Start showing performance. Slow down the top spring handle to turn and look at the second hand, the second hand starts to spin from your own European top bar with less spin times for better performance.
3. In the article. When the hand on the panel is easy to feel, there is no noise. In addition to the automatic fake watches on the driveway, the slippery phenomenon should generally be able to climb in the spring instead of slipping.
4. Needle plate. When pulling the needle, the side feels comfortable, too stiff or too loose. When the needle points to 3, 6, 9, and 12 characters, the needle should not deviate from 12 characters plus or minus 4 cells.
5. When the replica Cartier watch is completely wrapped, it should be clear, even no noise, and should not change with the direction.
6. Accurate time. A special tool is needed to measure it. Some large state-owned stores have customer service testing. At the time of purchase, they can ask the seller to Cartier replica check the accuracy of the waste and the wrong location.
In a rotating replica omega watch, look at the gear that faces the spring spiral, called zamainspring. In the dyvytysyaenerhiya ring and stored in the mainspring, turn, naKoronana side to see the main power of the busy winder. Then, the power on the mainspring observes the action while moving, and the spring needs to be wound again.
The self-winding fake watches movement has a mechanism that utilizes natural body movements to the owner to wind the mainspring. The clock of contains a oscillating weight, which becomes a nucleus. The normal movement described sees the user loading the pocket or the upper guiding arm to support the rotor as its employee attaches to the napochalasya antynatovskanamotuvannya mechanism. Thus the clock motion is converted into a circular motion weight, which is finally wound around the mainspring through a series of inverters and reduction gears. Modern self-winding mechanisms come in many different designs. Some designs allow the winding replica watches to occur, while the weight in one direction fluctuates and other more advanced mechanisms have two clockwise movements and counterclockwise two weight ratchet winds.
A typical clock full of clockwork can store enough energy reserves for about two days, allowing you to fake rolex continue working through the hospital overnight. In many cases, the automatic watch can also manually rotate the crown wound, so when the clock frequency is running, the student can’t wear it, if the owner of the wrist movement is not enough, let the automatic winding.