What factors should be paid attention to when repairing mechanical replica watches

Replica Watches now know more and more knowledge, causing many people to repair the watch and often get cheated, but this kind of news also often exists, so the following editor explains to you how to prevent mechanical repairs should pay attention to what problems.

What elements should be paid attention to when repairing mechanical replica watches?

Method 1: How to select a public or reputable table storage library (such as Hendry) or a storage table in a large shopping mall, monitor the private repair table of the shopping mall, and have some management restrictions on the store.

Method 2: I don’t believe that the actual table stores advertisements, nor the clock, and various complicated tables to repair the store. You should see what professional equipment and tools they need (such as whether school tools, rotary tools, waterproof tests, etc.) ) Put a table of oil on it, do not fix the oil on the 4~5 tables that have been repaired on it.

Method three: carefully check the maintenance cost, first of all, you must confirm the total maintenance cost, what is it, first inquire and discuss, determine the maintenance price, and then hand him the form.

Method 4: Don’t try to repair, don’t believe in the promised “Lidengkequ” (except to replace the battery and cut off the inspection and replica watch the belt), the watch is a necessary part of fake watch repair, not because of the reliability of the fake watches, he immediately handed it over client.

Method: When performing maintenance at five o’clock, first find out the internal phenomenon of the fake watch, and then look at its appearance, including the opening of the dial, whether the glass watch and case are free of original scratches and cross-state watches (and valuable Watch strap) clock knot № knot, you can use a digital camera to view all the details, the photo is better), go to the repair shop to apply and ask them to confirm. In addition, the text of the form, serial number, explicit record of the previous production (if any) and maintenance after deleting the form (mainly in the original location), repair and prosecution are also agreed.

Allows the replica watches to achieve the same waterproof performance as the original

You can clearly see that there is no gap in the strap after cutting. It is an ultra-thick piece of pure natural rubber.

We are comparing a slightly inferior rubber strap. We can find that this strap is made of two thin pieces of rubber with a gap in the middle. This causes the rubber strap to be cold. In the environment, it will be more fragile and prone to cracks.

Here are the details of the bezel. This replica watch and the Sub’s bezel look similar but completely different. In terms of rotation, this outer ring rotates in both directions. The Sub is a unidirectional rotating outer ring. Therefore, the design also needs to fake Rolex be redesigned. However, such a two-way rotation will have a good advantage, that is, because the Sub has a card position, it will cause the bezel to loosen a little, but YMII will not have this situation at all.

The handlebar head is completely set according to the genuine design, and is set at the same time. Allows the fake watch to achieve the same waterproof as the original. Regarding the differences between the physical and the design drawings, you can compare them. The size of the design drawings is already very large. And it is a full-plane design drawing, and everyone can compare it to the original and see the difference.

The movement is equipped with a genuine ETA 2836-2 movement produced by the original Bao Yingnag. The default day difference is the water of the observatory. No need to re-calibrate, the durability is the same as the genuine INAG. This is a super high quality replica watches movement that no seller can provide.

OMEGA mechanical replica watch safetyes measures

Omega mechanical replica watches are eye-catching glasses:

First, do not automatically open the back cover of the replica Omega watches.
Two adjustment belt lengths, slightly adjust the position of the moving finger, adjust the belt shaft.
Third, use Omega replica watches, try not to touch water, steam, heat or corrosive gases, so as not to cause unnecessary damage to sports and appearance. At the same time, we must avoid strong vibrations away from strong magnetic media.


Fourth, there is a full clock every 24 hours to provide enough time to travel the required power. When working clockwise, look up 12 o’clock and turn clockwise clockwise. Please note that after completely entangled, do not force the workbench again to avoid damaging the upper shaft or winding.

You need to pull out five quick calendars from the table. The time points point from clockwise to 12 o’clock, from 3 to 4 hours, then clockwise to 12 o’clock, and the calendar adjusts quickly. Pull the table knob to rotate the knob clockwise twice and cancel the calendar one day.

Precautions when using OMEGA automatic replica mechanical watches:

First, please do not open the back cover to prevent damage.

After adjustment, the two OMEGA watches will return to the end. That’s it
three.Replica Omega mechanical clocks can be slow when the user moves relatively slowly. this is normal phenomenon.

Four Omega replica strap length adjustments: Slightly adjust the pivot pin position and adjust the Omega strap size.

The replica watches glass material is mainly sapphire and glass-Fake Rolex

1. that material is glass quartz watch.

Glass material is mainly sapphire and glass. For sapphire is more expensive. As a rule, the material is expensive to fake watches. Sapphire glass is very common and also a trend in the future, and the price of glass is relatively cheap. Usually it is used at cheap watches. In fact, dear good, cheap, too, is an advantage.

2. Characteristics of the table sapphire crystal quartz glass.

The sapphire crystal is widely used. The sapphire crystal is mainly in accordance with the needs of modern society fake rolex. Sapphire glass has a strong wear resistance and is not easy to scratch on a daily basis. Thus, after wearing longer time, the sapphire crystal will be relatively more beautiful than glass. It will be more transparent.

fake Rolex

3. Features watch quartz glass.

While looking at glass is relatively cheap fake Rolex, looking out of glass is also an advantage. The hardness of looking at glass is stronger than that of sapphires. The collision of resistance is strong, the daily use is not easy to break and the durability is relatively high. It’s easy to scratch it. Beauty can not stand the test of time.